Stacks Image 11

SOLENOID VALVES

AAA, ARO, ASGO, BRAY, GOYEN, JEFFERSON, KEYSTONE, MAC, PARKER,
PNEUMATIC, REXROTH, SCHRADER BELLOWS, SMC, WAM

solenoid valve
solenoid valve 2
solenoid valve 5
solenoid valve 4
solenoid valve 3
solenoid valve 6
solenoid valve 7
solenoid valve 10
solenoid valve 9
solenoid valve 8

BUTTERFLY VALVES

Bray, Keystone and Wam Valves with Actuators
butterfly valves
butterfly valves 3
butterfly valves 2
Limited Switches
Limited Switches
Replacement Seats
Replacement Seats
Limited Switches 2
Limited Switches
Wrench Arm & Mounting Bracket for Keystone Cylinder Set UP
Wrench Arm & Mounting Bracket
Wrench Arm & Mounting Bracket 3
Wrench Arm & Mounting Bracket 2

SILO PREASURE RELIEF VALVES

Adjustable Weighted Pressure relief Valve - VCP Pressure Relief Valve that vents positive and negative pressure

silo Pressure relief Valve
silo Pressure relief Valve 2

ROTARY VALVES

Rotolok and Wam Rotary Valves, Metering valves and Shutoff Valves - Metric or Standard, Round or Squares, and ceramic lined

Rotary Valves
Rotary Valves 3
Rotary Valves 2
BALL VALVES

Ball valves available in bronze, brass, carbon steel and stainless steel
ball valve
SLIDE GATES & KNIFE GATES

Wam and Orbinox slide and knife gates, round or square opening and operated with
manual handle or pneumatic cylinders.
slide and knife gate
slide and knife gate 3
slide and knife gate 2

CLAM SHELL BIN GATES

Complete line of Simplex and Duplex bin gates constructed of heavy gauge steel plate, abrasion-resistant or stainless steel. Any model can be adapted for pneumatic operation. Easily attached to hoppers, bins, and chutes. Numerous sizes in stock.

Duplex bin gates
Duplex bin gates 2
Duplex bin gates 3
Duplex bin gates 4
everlasting logo

THE ORIGINAL ROTATING DISC VALVE
Invented by Everlasting Valve more than a century ago, our self-lapping, Rotating Disc Valve remains the toughest, longest lasting, best performing valve on the market today.

Process Valves

Process Valves

Used in dry powders or slurries of erosive media. Suitable for handling abrasive particulate in temperatures up to 1500°F and pressures as high as 10,000 psig, in sizes 1" through 18".

Diverter Valves

Diverter Valves

Can be switched without stopping the conveyor compressor. Used for slurries and dry powders, including: Portland cement, bottom and fly ash, titanium dioxide, tabular alumina, alumina silica, kaolin, Raney nickel catalysts and metal silicon powders.

Bulk Material Valves

Bulk Material Valves

Designed for pressurized (up to 100 psig) and vacuum systems, including dense and dilute phase pneumatic conveying systems, for transporter fill valve, discharge, and vent applications, transfer lines, under baghouses, silos and dust collectors.

Boiler Blowdown Valves

Boiler Blowdown Valves

Our boiler blowdown valves are manual on/off valves that effectively blow down sludge formed in steam boilers. Available in quick opening, slow opening straight and angle configurations.

rotating disc valve
rotating disc valve 2
rotating disc valve 3
rotating disc valve 4

SHEFFER PNEUMATIC & HYDRAULIC CYLINDERS

BUILT TO PERFORM
Sheffer’s pneumatic actuators and cylinder series covers a wide range of applications from custom tie-rod cylinders to NFPA cylinders. With bores ranging from 3/4" thru 14" as catalog standards and larger as custom, with pressure ratings up to 250 PSI, these reliable, long-lasting cylinders bring Sheffer performance anywhere you require linear pneumatic actuators.

A Series – heavy-duty pneumatic cylinders
MA Series – medium-duty pneumatic cylinders
C20 Series – cast-iron pneumatic cylinders
AA Series – low-cost aluminum pneumatic cylinders
CL Series – heavy-duty clamp pneumatic cylinders

BUILT TO LAST
With quality, reliability and the ability to handle ultra-high pressure, Sheffer hydraulic cylinders bring numerous advantages to every application, from custom tie-rod cylinders and hydraulic actuators to NFPA cylinders.

HH Series – heavy-duty hydraulic cylinders
MH Series – medium-duty hydraulic cylinders
UH Series – ultra high-pressure hydraulic cylinders
CL Series – heavy duty clamp hydraulic cylinders

ACCESSORIES
Top to bottom.
Designed especially for our high-performance hydraulic and pneumatic cylinders, Sheffer accessories enable you to get maximum performance from your solution. And because they are built to the same standards as our other products, you know they're built to last.

• Limit switch actuators – mechanical, magnetic, proximity
• Electronic positioning devices
• Valve mounting blocks available
• S.A.F.E. – Self Aligning Flange End
• Uni-Lign – Universal Alignment Mounting Accessory
• Clevis and pivot mounting brackets
• Jam nuts
• Front head spacer bars
• Rod clevis and pins
• Pin and retainer assemblies
• Rod aligning coupler
• Rod eyes
• Weld plates
pneumatic  hydraulic cilinders

MOTION CONTROLS AIR CYLINDERS


D SERIES:

Non-Metallic Bearings - A specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. Bearing assembly is easily removed for quick replacement.
Non-Lube Operation - Long life D cylinders are specifically designed for non-lube operation.
Cushions - High energy absorption poppet style adjustable cushions are available as a standard option. Cushion adjusting screw is normally located in position number 4.
Piston Rod - Hard chrome plated steel, ground and polished. Two wrench flats standard on all bore sizes. Full male national coarse threads are standard. All other threads available as options.
Tubing - Hard coated I.D. aluminum for corrosion resistance and low friction.
Seals - All dynamic seals are self-adjusting Block Vee Buna-N U-cups.
End Caps - Machined high strength aluminum alloy.
Pressure Rating - 250 psi. air or "non-shock" hydraulic.
Temperature - Operating temperature range from a minimum of 10° F (-12°C) to a maximum of 200° F (93° C).
Cushions - Popper cushions can be specified for either or both ends of the Series "D" cylinder. Standard cushion length is one inch, with optional lengths of two, four, and six inches. Each standard cushion increases the cylinder length by one inch.

K SERIES:

Non Metallic Bearings - A specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. The bearing assembly is easily removed for quick replacement.
Non-lube Operation - Long life K cylinders are specifically designed for non lube operation
Cushions - High energy absorption poppet type adjustable cushions are available as a standard option. The cushion adjusting screw is normally located in position No. 2
Piston Rod - Hard Chrome plated steel ground and polished. Two wrench flats standard on all bore sizes. Small male national fine threads are standard. All other threads available as options.
Tubing - Hard coated I.D. aluminum for corrosion resistance and low friction.
Seals - All dynamic seals are self adjusting Block Vee Buna-N U-cups.
End Caps - Machined high strength aluminum alloy.
Pressure rating - 250 PSI air or "non stick" hydraulic
Temperature - Operating temperature range from a minimum of 10° F (-12° C) to a maximum of 200° F (93° deg C).

motor controls air cylinders

Aeration & Blowers • Air Line Control • Boots • Cement Screws & Loading Spouts • Concrete Plants • Conveyors • Dust Control System • Level Controls • Mixers • Valves & Cylinders • Vibrators • Water & Moisture Meters & Pumps • Wear Liners

C & G Equipment ● 3590 NW 96th Ave. ● Hollywood, FL 33024 ● Phone: (954) 602-1265 ● Fax: (954) 602-1275